Mercury Enterprise Pro 6G
SATA 2.5" · SATA 3 6GBps · SandForce SF-2582
Specifications
| Interface | SATA 3 6GBps |
|---|---|
| Controller | SandForce SF-2582 |
| NAND Type | MLC |
| DRAM Cache | N/A |
| Warranty | 7 years |
| Seq Read | 550 MB/s |
|---|---|
| Seq Write | 550 MB/s |
| Seq Read | 550 MB/s |
|---|---|
| Seq Write | 550 MB/s |
| Seq Read | 550 MB/s |
|---|---|
| Seq Write | 550 MB/s |
| Seq Read | 550 MB/s |
|---|---|
| Seq Write | 550 MB/s |
Overview
The SandForce SF-2582 powered Mercury Enterprise Pro is available at four capacities namely 50 GB, 100 GB, 200 GB and 400 GB. The drive can reach a maximum sequential read speed of 550 MB/s and sequential write speed of 520 MB/s. It boasts an IOPS of 60,000 for both random 4k read and write. With these figures, the Mercury Enterprise Pro is best suited for critical deployments.
Each variant contains 28% over-provisioning space that is used for real-time redundancy and error correction. The Mercury Enterprise Pro can be used as a single drive or RAID configurations on all levels. SMART and OS-dependent TRIM commands are also supported. Together with the controller are enterprise-grade toggle synchronous NAND flash modules based on eMLC. The drive comes with a seven-year limited warranty.
Specifications:
- Sequential Read: Up to 550 MB/second
- Sequential Write: Up to 520 MB/second
- NAND type: MLC
- Interface: SATA 3 6GBps
- Controller: SandForce SF-2582
- Form Factor: 2.5 inches
- Power Consumption (idle): <1.2 W
- Power Consumption (active): < 3 W
- DRAM Cache: None
- TRIM support: Yes
- SMART support: Yes
- Warranty: 7 years
Part Numbers:
- 50 GB : OWCSSDMEP6G50
- 100 GB : OWCSSDMEP6G100
- 200 GB : OWCSSDMEP6G200
- 400 GB : OWCSSDMEP6G400